Beam Clip P
Universal clamping element for bi-lateral attachment of crossbars for pipe runs, ducts, cable lines and equipment to steel beams.
The maximum clamping range may be extended by up to 10 mm by using spacers. Any thicker spacers should be welded to the crossbar.
Determination of the required bolt length Lmin:
M8 or M10
Torque ± 10%
| Arrangement A|| Arrangement B|
| Pass-through bolt |
with holding bracket
| Channel nut HZ|
| Lmin = a + b + 37 [mm]|| Lmin = b + 40 [mm]|
| Type|| Working load|
|P 1|| 4.0 kN|
Note: For vertical installation please contact Sikla Technical Department
| Material:|| Cast iron or steel, electro-galvanised|