Pipe Clamps & Accessories
Ratio LS
Application
Two-piece pipe clamp with double threaded nut (M8/M10) for installing pipe systems for M&E services. For soundproof ceiling, floor and wall installations. With time-saving quick-set clip.
From 4" on, or when higher static loads occur, or under reversed bending stress, we recommend the use of a Stabil Pipe Clamp with lining.
Installation
After pressing together both parts of the clamp, the clamping bolt head must be located behind the angled profiles; then tighten clamping bolt (2 Nm).
Technical Data
|
Size [mm] | Max. perm. working load (tension) |
|---|---|
| 12 - 84 | 0.60 kN |
| 83 - 90 | 0.95 kN |
| 108 - 114 | 1.15 kN |
The recommended load is calculated using specific statistical methods relating to break load and is designed to restrict deflection to 1.5 mm or 2 % of the maximum applicable clamping diameter.
Perm. load FZperm,fi in case of fire
| Size range [mm] | FWD 30 [N] | FWD 60 [N] | FWD 90 [N] | FWD 120 [N] | Deformation δmax [mm] | Thread ≥ |
|---|---|---|---|---|---|---|
| 12 - 84 | 290 | 130 | 70 | 50 | 35 | M10 |
| 83 - 90 | 390 | 210 | 130 | 90 | 31 | M10 |
| 108 - 114 | 540 | 270 | 170 | 120 | 46 | M10 |
| Material: | |
| Clamp: | Steel, electro-galvanised |
| Spring element: | Spring steel |
| Sound absorption lining: | SBR/EPDM (black) (see chapter "Sound Absorption Products") |
| Sound absorption: | Up to 17 dB(A) |
Approvals / Conformity
 |  | This product has been awarded the RAL quality marks "pipe supports" and "fire-tested pipe supports" and is subject to continuous external monitoring according to RAL GZ-655. |